| Background |
| Accreditation |
| Appendix I |
B. Accreditation Summary
Appendix IC. Faculty Vitae
John Jackman
Associate Professor
Director of Graduate Studies
Degrees
Ph.D. Industrial Engineering, Pennsylvania State University, 1986
M.E. Industrial Engineering, Pennsylvania State University, 1983
B.S. Chemistry, Rensselaer Polytechnic Institute, 1975
Service
Associate Professor, Iowa State University, 1993-present
Assistant Professor, Iowa State University, 1987-1993
Related Experience
Senior Industrial Engineer, Rockwell Collins Commercial Avionics, Cedar Rapids, IA., Summer 1996.
Summer appointment as Software Engineer, Systems Modeling Corporation, Pittsburgh, Pennsylvania, l988
Software Engineer, Systems Modeling Corp. State College, Pennsylvania, 1984-l987
Consulting
Sundstrand-Sauer
Motorola
John Deere
Stine
Principal Publications
Yang, Tai-Hung and Jackman, John, "Form Error Estimation Using Spatial Statistics," ASME Journal of Manufacturing Science, Vol. 122, pp. 262-272, 2000.
Jackman, J. and Park, D., "Probe Orientation for Coordinate Measuring Machine Systems Using Design Models," Robotics and Computer-Integrated Manufacturing, Vol. 14, pp. 229-236, 1998.
Yang, Tai-Hung and Jackman, John, "A Probabilistic View of Problems in Form Error Estimation," Journal of Manufacturing Science and Engineering, Vol. 119, pp 375-382, August 1997.
Johnson, Eric and Jackman, J., "Interval Coverage in Multiclass Queues Using Batch Mean Estimates," Management Science, Vol. 42, No. 12, pp. 1744-1752, December 1996.
Schmidt, L. and Jackman, J., "Evaluating Assembly Sequences for Automated Assembly Systems," IIE Transactions, Vol. 27, pp. 23-31, 1995.
Jackman, J., Linn, R., and Hyde, D., "Petri Net Modeling of Relay Ladder Logic," J. of Design and Manufacturing, 5, pp. 143-151, 1995.
Choi, B., Kuo, W., and Jackman, J., "Petri Net Extensions for Modeling and Validating Manufacturing Systems," Int. J. Production Research, Vol. 32, No. 8, pp. 1819-1835, 1994.
Jackman, J., Deng, J., Ahn, H., Kuo, W., and Vardeman, S., "A Compliance Measure for Alignment of Cylindrical Part Features," IIE Transactions, Vol. 26, pp. 2-10, 1994.
Professional Societies
Senior Member of Institute of Industrial Engineers (IIE)
Member of American Society for Engineering Education (ASEE)
Honors and Awards
A. D. Welliver Fellowship, 1995, Boeing
Outstanding IE Professor of 1995-1996, Engineering Student Council
Service
Director-Elect, Manufacturing Division of the Institute of Industrial Engineers
Editor and Member of IIE Transactions Editorial Board, 1997-present
Professional Development
Attended 1999 IIE Research Conference, Phoenix, Arizona, May 1999
Proposal Writing for Faculty and Researchers, Bloomington, Minnesota, June 1998.
Panel discussion on Graduate Education at the 1998 IIE Research Conference in Calgary, Canada, May 1998.
All contents copyright © 1998-2000 Iowa State University
Department of Industrial and Manufacturing Systems Engineering
Comments to: imse@iastate.edu
Updated: 04/11/2000
http://www.imse.iastate.edu/homepage.html